Table of Contents
Advertisement
5.1.2.1. How to enter DVD Self-Diagnostic mode
1. Insert a DVD disc into the DVD Unit.
2. Set the unit to DVD mode. Then, press STOP button to stop
playback.
Note:
Do not let a DVD play during DVD Self-Diagnostic mode.
3. Press and hold STOP, SKIP+, and VOL- buttons of operation
panel on the unit together for over 5 seconds with no cassette
inserted. The adjustment overlay will appear on the TV screen.
4. Press DISPLAY key on the remote control to enter DVD Self-
Diagnostic mode.
5. Press "1" key on the remote control. The DVD Self-Diagnostic
Test function will start automatically.
6. After a few minutes (approx. 1~5 minutes), the check results will
appear on TV screen.
- If no error is detected, "COMPLETED" will appear as shown
in Fig. 2-4. Be sure to press Power OFF to end. Then, press
Power ON again and remove a DVD from the DVD Unit.
Fig. 2-1
Fig. 2-2
Fig. 2-3
Fig. 2-4
Advertisement
Table of Contents
