Advertisement
3
Plug
• Insert the pegs on the tree top into the plugs on the trunks.
4
• While holding the tree top in place, carefully turn the
assembly upside down.
• Insert four screws through the trunks and into the tree top.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Pegs
Plug
Assembly
5
Pegs
Plugs
• Turn the base assembly upright.
• Bend the top of the rope ladder to fit it behind the tab on
the tree top.
6
Cupped
Tabs
Large Peg
Small Peg
Bridge
• Snap the cupped tabs on the swing log onto the large
pegs on the floor.
• Fit a hole on one of the sides of the bridge onto one of the
small pegs on the floor.
• Insert the small peg on the other side of the floor into the
hole on the other side of the bridge.
4
Tab
Swing Log
Large Peg
Hole
Small Peg
Rope
Ladder
Floor
Advertisement
