The Lengthwise Movement Of The Feed Dog - Singer Futura CE-150 Service Manual

18. The lengthwise movement of the feed dog

Check
1. Turn on the machine and select straight stitch and set the machine to maximum feed lenghts.
2. Remove presser foot.
3. Turn hand wheel at least one full turn in the sewing direction.
4. The clearance between needle plate and feed dog, when it's in it's most front position, should be bet-
ween 0.5 to 1.5 mm.
Adjustment
1. Remove bottom cover before adjustment.
2. Loosen set screw (C) of feed regulating arm (B) on horizontal feed shaft (A) which operates feed dog.
3. Adjust the position by moving the feed dog theeth in either way.
4. Hold feed dog theeth in position with one fi nger then tighten the set screw (C) fi rmly.
0.5-1.5 mm
C
B
A
Singer Furtura III series 23