Advertisement
2-8-1 KEY Function
1. R-SELECT KEY
Press to select RED color.
2. G-SELECT KEY
Press to select GREEN color.
3. B-SELECT KEY
Press to select BLUE color.
4. R-MUTE
Press to mute RED color.
5. G-MUTE
Press to mute GREEN color.
6. B-MUTE
Press to mute BLUE color.
7. CANCEL KEY
Recalls the previous data during convergence Adjustment.
(Recalls the last memorized data)
8. TEST/NORMAL
Used for switching back to the Normal screen fter entering Convergence Mode while receiving a
general input signal. Allows for comparison between the Adjustment screen and the Normal screen
during adjusment.
♣ Each press of the key will switch between modes.
9. LINE SHIFT KEY
(Repeat Fine Adjustment (no indication) → Line Adjustment → Enter Mode)
- This key moves the line or whole pattern selected by the cursor, in the following directions :
up/down/left/right, at the beginning of the Convergence Adjustment.
- Press the
key 2 more times for fine Adjusment.
10. FACTORY DATA SELECT KEY
Press to call the factory default values.
11. H/V DIRECTION SELECT KEY
Press to switch the cursor direction horizontally or vertically.
12. SAVE KEY
After the Convergence Adjustments are completed, press to save data.
Samsung Electronics
Alignment and Adjustment
2-23
Advertisement
