Table 15 Value Table For Soaking - ABB HT568673 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
6 Periodic maintenance work
6.4.7 Cleaning the cartridge group on turbine end
Soaking the contamination
Baked layers of contamination from heavy fuel oil or coked oil occur at the turbine end. The
contamination can be removed by soaking and brushing. The procedure for soaking the layers
of contamination as well as for cleaning the turbine are described in the following.
Figure 27: Soaking the turbine end
Product
A130
A135
A140
Table 15: Value table for soaking
To soak the layers of dirt on the turbine, the cartridge group can be immersed vertically in a
container (02) with fluid.
Set the container (02) inside a larger container (03) so that the overflowing fluid can be

collected.
Selection of the cleaning agent
Cleaning agents which contain chlorine attack metals.
Use only pH-neutral cleaning agents which do not attack metals.

CAUTION
Observe safety data sheet.

Fill the container (02) with soaking fluid.

© Copyright 2015 ABB. All rights reserved.
A [mm]
108
128
157
HZTL4030_EN
B [mm]
17
20
25
Revision C
Page 61 / 115
C [mm]
205
245
300
September 2015