Operation Manual / 4 Product description / A130-H.. - A140-H..
8
Dismantling and fitting
Page 94 / 115
Installing the compressor casing
Figure 48: Installing the compressor casing
Part number
A130
A135
A140
72011
M8
M10
M12
35 Nm
70 Nm
105 Nm
Table 41: Tightening torque (72011)
Always replace the O-ring (42012) (see chapter Spare parts).
1. Thoroughly clean the fastening strips (72012) before assembly.
2. Attach swivel lifting eyes (01) to the compressor casing (72000) and lifting gear.
3. Install the compressor casing (72000).
4. Install the fastening strips (72012) with screws (72011).
© Copyright 2015 ABB. All rights reserved.
HZTL4030_EN
Revision C
September 2015