Commissioning After Taking Out Of Operation - ABB HT568673 Operation Manual

Operation Manual / 4 Product description / A130-H.. - A140-H..
3 Commissioning
3.3

Commissioning after taking out of operation

If present
Remove cover plates (blind flanges) on the compressor casing, on the gas-inlet as well as

on the gas-outlet.
Remove the screw plugs on the water connections and fit the water pipe.

Version with compressor wheel cooling:
Remove the screw plug on the cooling air connection and fit the cooling air line.

General
Check the exhaust gas pipe before and after the turbine for combustion residues or water

residues and clean it. Remove any foreign objects that may be present.
Check and clean filter silencer or air supply line, and remove any foreign objects that may

be present.
Put engine-side oil circulation to the turbocharger into operation.

Prepare the turbocharger for operation according to section "Checks before

commissioning".
The turbocharger is now ready for operation.

© Copyright 2015 ABB. All rights reserved. HZTL4030_EN
Page 27 / 115
Revision C September 2015