Light Indicators; Remote Controller; Maintenance - Hyundai H-SF16-RC02 Instruction Manual


Speed button switches the fan on and shifts between different speeds

Mode button helps to choose operating mode of fan.

Nor (normal)

Nat (nature) - air stream by intense waves

Slp (sleep)

Timer button helps to adjust fan operating time up to maximum time of
7 hours and a half. Each pressing of this button adds half an hour of fan
operating time. For example, if you wish to set operating time of 5
hours and a half, you need to do the following: Press the button "Timer"
several times and see on display: 0.5h, 1h, 4h, that means you have
set 5.5h

LIGHT INDICATORS:

0.5h...4h - fan operating time set


Nor - air stream at constant rate

Nat - air stream by intense waves

Slp - air stream by weak waves
H – high speed;

M – middle speed;

L – minimum speed;


REMOTE CONTROLLER:


Mode settings can be made manually by using switch mode buttons on
control box or by using remote controller:

ON/OFF button switches on the power/ button switches the fan off.

Speed button switches the fan on and shifts between different speeds.

Mode button helps to choose operating mode of fan.

Nor (normal)

Nat (nature) - air stream by intense waves

Slp (sleep)

Timer button helps to adjust fan operating time. Each pressing of this
button adds half an hour of fan operating time.
NOTE: Remote controller operates on AAА 1.5V batteries which are not
included.

On the upper part of the motor cover there is oscillating knob. If
pressed, it makes the fan cabinet with blades traverse from side to
side. To cancel oscillating mode push oscillating knob upward.

MAINTENANCE


Before cleaning unplug fan first.

Do not use abrasive cleansers

Clean front and rear grilles, blades, stand tube and stand base with soft
moistened cloth and wipe dry.
STORAGE

Keep the device in normal conditions in dry place.
- air stream at constant rate
- air stream by weak waves
- air stream at constant rate
- air stream by weak waves
10