Triplett CamView W35v Instruction Manual
  1. Manuals
  2. Brands
  3. Triplett Manuals
  4. Monitor
  5. CamView W35v
  6. Instruction manual

Triplett CamView W35v Instruction Manual

Wrist mounted test monitor with 3.5” lcd
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CamView W35v
Wrist Mounted Test
Monitor with 3.5" LCD
Instruction Manual
1-12

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CamView W35v and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Triplett CamView W35v

Summary of Contents for Triplett CamView W35v

  • Page 1 CamView W35v Wrist Mounted Test Monitor with 3.5” LCD Instruction Manual 1-12...
  • Page 2 • Thank you for purchasing the Triplett CamView W35v CCTV Monitor. Please read the complete manual carefully before using the product. • To assure safe use of this product, please read the section on Safety carefully, and observe any Cautions or Warnings posted there and throughout this manual.

  • Page 3: Table Of Contents

    Table of Contents Safety Information ...............1 Introduction ...................2 Features ...................3 Included Items ................4 Controls and Indicators ...............5 Battery Information ..............6 Installing and Charging the Batteries ........7 General Instructions ..............8 Troubleshooting ................10 Warranty ..................11 Page 2...

  • Page 4: Safety Information

    1: Safety Information Dear Customer: For greatest safety and reliable operation, please follow these guide lines for use and care of the product. Please retain these instructions for future reference. 1. Do not expose the product to excessive dust or dirt, intense vibration, extreme humidity, or high temperatures.
  • Page 5 8. Do not drop, strike, bend, or crush the batteries. Do not place the batteries in a metal container. Failure to observe this precaution 9. Use only the charger provided with the product. Use of a di erent 10. Do not exceed the input voltage rating of the charger (110~240 VAC / 50/60 Hz).
  • Page 6 16. Do not leave the product exposed to direct sunlight. 17. Do not allow children to use the product. 18. It is normal for the product to heat up while being used. 19. It is normal for the product to heat up while its batteries are charging.

  • Page 7: Introduction

    6 hour NiMH rechargeable battery delivers extended runtime. All video settings (Brightness, Contrast, Saturation, Sharpness) are adjustable via an On Screen Menu. The Triplett CamView W35v is an e cient time saving test tool that will enhance any professional tool kit.

  • Page 8: Features

    • Tripod Thread • SilkGrip Finish • Carrying Case Included • Cables Included • 1 Year Warranty 4: Included Items • CamView W35v • RCA Audio/Video Output Cable • NiMH Batteries • 12V Power Cable with 5.5mm Coaxial Connector • Battery Charger •...

  • Page 9: Controls And Indicators

    5: Controls and Indicators POWER MENU MENU OFF 1. Built-in 1 Watt speaker 2. Power / Charging Indicator, Bi-color LED (Red, Green) 3. MENU / Select Button 4. Increase Setting 5. Decrease Setting 6. MENU OFF 7. Charger Input (Power in) 8.

  • Page 10: Battery Information

    6: Battery Information To obtain the maximum battery life and aviod battery leaks, fire or explosion, observe the following instructions and warnings. • If the product is unused for several weeks, the batteries will slowly discharge by themselves. Recharge the batteries before use. •...
  • Page 11 • Do not transport or store the batteries in a metal container or with other metal objects. • Discard old batteries in an approved manner. Page 10...

  • Page 12: Installing And Charging The Batteries

    6: Installing and Charging the Batteries Flip the Stand up, pull it up, and twist it around out of the way of the battery cover. Remove the battery cover, sliding it in the direction of the arrow molded in the plastic . Install the batteries observing proper goes against the coil spring.
  • Page 13 Replace the battery cover and reposi- • Plug the charger into the power source (wall outlet) then plug the charger cable into the connector (7) on the side of the product. twice slowly (as the product tests the batteries) then turn on solidly quickly, there is a problem with the batteries.
  • Page 14 • Do not charge the batteries in a place where the temperature exceeds 140 degrees F. The batteries may be damaged or may explode. • Fully charged batteries will not charge again until they are depleted. Partially discharged batteries may be recharged at any time. •...

  • Page 15: General Instructions

    When operating from batteries, the LED should light up green. The CamView W35v continually tests for the presence and type of video signals applied to its input. It will automatically detect NTSC or PAL video signals, select the appropriate format, and display the video image.
  • Page 16 Connecting the Video and Audio Inputs: A video signal can be connected to the CamView W35v in two places. For the best durability, the BNC video input jack (11) should be used. The video input on the side of the W35 (9) uses a mini-plug and is more easily damaged that the BNC.
  • Page 17 Using 12VDC Camera Power Continued: When the 12VDC output is being used, the battery life of the CamView is reduced to as little as 1 hour, depending on the load presented by the camera. Hence, for maximum battery life, it is advisable to only power up the camera as necessary and to complete the adjustments in the most e cient manner.
  • Page 18 On Screen Display (OSD) The factory settings are defaulted to “50”. When the settings are changed, the CamView W35v will remember them, even when the power is turned o . yellow cursor bar and press and release the MENU key (3) repeatedly until the bar highlights the desired setting.
  • Page 19 Using the Wristband: With the monitor face down, install the wristband through one slot as shown. The Velcro strips should be facing down. Put the end of the wristband through the other slot as shown. Pull the wristband completely through the slots until the metal Page 18...
  • Page 20 Front view of monitor and wristband Place monitor against wrist or arm with wristband hanging over arm. Bring end of wristband around back of arm and insert it through the buckle from the back, pulling it all the way through. Fold and pull end of wristband back over itself, adjust - ing to the desired tension, and se- cure against the Velcro strips.
  • Page 21 Using the Stand as a Belt Clip: Pull the stand out and let it hang loose. Slip the end of the Stand over belt or waist of pants. Page 20...
  • Page 22 Using the Stand: Pull the stand out and let it hang loose. Pull Stand up (there is a spring inside) and rotate it by 90°. Release Prop monitor up using the Stand. Page 21...
  • Page 23 Using the Mounting Thread: Attach the monitor to a tripod or mounting bracket (not supplied) as Mounting bracket with ¼ x 20 thread. Screw the bracket into the female thread on the bottom of the monitor. Attach the bracket to wall or other surface.
  • Page 24 Standby and Low Battery: When the battery is low, the LED (2) won’t light when the power switch (8) is turned on. There is a narrow region of battery voltage where the LED will light up green, but the monitor won’t operate. This can be mistaken for the Standby mode.
  • Page 25 Display 3.5” High Contrast Active Matrix TFT LCD Screen Video Formats Supported NTSC and PAL Resolution 320 x 240 Aspect ratio Viewing Angle 40/60/60/60 (up/down/left/right) Brightness 250cd/m Contrast 350:1 Response time 25ms Video Level and Impedance 1.0Vp-p 75ohm Audio Speaker Video Adjustments via Brightness, Contrast, Saturation (Color), On Screen Display (OSD)
  • Page 26 Connectors Audio/Video Input (3.5mm, 4 circuit), Audio/ Video Output (2.5mm, 3 circuit), Charger Input (mini USB), Video Input (BNC), Video Output Loop Thru (BNC) Battery Life 6 Hours continuous operation, (with full charge) 12 Hours Standby 1 hour when using fully loaded 12VDC output Batteries AA 1.2V 2500mAH NiMH x 4...
  • Page 27 Product dimensions 4 ¾” x 3 ¾” x 1 ¼” Weight 10 Ounces Page 26...

  • Page 28: Troubleshooting

    10: Troubleshooting Problem Reason Solution Batteries discharged Charge battery Batteries installed Install batteries incorrectly correctly Won’t turn on Bad battery Clean the battery connections terminals Apply video signal No video signal input to the input Batteries discharged Charge battery Monitor turns o Video signal removed Reapply video signal Warm monitor Battery is cold...
  • Page 29 Problem Reason Solution Bad battery Clean the battery Indicator LED is connections terminals normal but battery Battery has been Replace with new doesn’t charge batteries charged too many times Check video source No video input and connections No video display Bad cables Replace cables Page 28...
  • Page 30 11: Triplett One Year Limited Warranty Triplett warrants instruments and test equipment manufactured by it to be free from defective material or workmanship and agrees to repair or replace such products which, under normal use and service, disclose the defect to be the fault of our manufacturing, with no charge within one year of the date of original purchase for parts and labor.
  • Page 31 No representative of Triplett / Jewell Instruments or any other person is authorized to extend the liability of Triplett in connection with the sale of its products beyond the terms hereof.
  • Page 32 Manchester, NH USA triplett.com 800-triplett...

Table of Contents