Advertisement
User Manual
GSM200
Desktop Indoor Air Quality Monitor (CO2,
Temperature and Humidity)
Introduction
Thank you for selecting the Triplett GSM200. The Carbon Dioxide
(CO2) Monitor is designed for air quality control and health control by
measuring Carbon Dioxide level in areas where CO2 could be a
concern. The measured CO2 value in ppm (parts‐per‐million),
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Triplett GSM200
Summary of Contents for Triplett GSM200
- Page 1 Desktop Indoor Air Quality Monitor (CO2, Temperature and Humidity) Introduction Thank you for selecting the Triplett GSM200. The Carbon Dioxide (CO2) Monitor is designed for air quality control and health control by measuring Carbon Dioxide level in areas where CO2 could be a...
- Page 2 Temperature, Humidity and Time will be displayed on the LCD along with three CO2 status indications: Good (0 to 800ppm), Normal (800 to1200ppm), Poor (>1200ppm). An acoustic alarm sounds when the CO2 level exceeds a defined level. This meter is shipped fully tested and calibrated and, with proper use, will provide years of reliable service.
- Page 3 Press the ▲or ▼ button to increase or decrease the value. Press the ESC button to exit the setting mode. “GOOD‐NORMAL” and “NORMAL‐POOR” Value Setting In the Alarm Value Setting mode, press the ALARM button to set the GOOD NORMAL t display. Adjust the value as needed. Press the ESC button to exit the mode.
- Page 4 Backlight Touch the button area below the LCD and the backlight will turn on. It will turn off automatically after 20 seconds of inactivity. Press “ESC” button at any time to exit the function. ABC (Automatic Baseline Calibration) ABC (Automatic Baseline Calibration) establishes a baseline calibration to eliminate the zero drift of the infrared sensor.
- Page 5 Triplett / Jewell Instruments extends the following warranty to the original purchaser of these goods for use. Triplett warrants to the original purchaser for use that the products sold by it will be free from defects in workmanship and material for a period of (1) one year from the date of purchase.
Need help?
Do you have a question about the GSM200 and is the answer not in the manual?
Questions and answers