Kenwood Spiralizer KAX712PL Instructions Manual page 5

Refer to your main Stand Mixer instruction book for additional
safety warnings.
• This appliance conforms to EC
Regulation 1935/2004 on materials and
articles intended to come into contact
with food.
This attachment features the Twist
Connection System
to fit directly on the latest generation
Kenwood Chef models (identified as
TYPE KVC, KVL, KCC, KWL and KCL).
This attachment can also fit KMix
Stand Mixers featuring a slow speed
attachment outlet (TYPE KMX).
To check that this attachment is
compatible with your Stand Mixer you
will need to ensure both components
feature the Twist Connection System
.
If your Stand Mixer features the
Bar Connection System
you will also need an adaptor
before operation is possible. The
reference code for the adaptor is
KAT001ME. For more information
and how to order the adaptor visit
www.kenwoodworld.com/twist.
before using for the first time
Wash the parts: see 'care and cleaning'.
key
pusher with support blade
lid with feed tube
cutting cone
Spaghetti (2 x 2 mm)
Linguine (2 x 4 mm)
Tagliatelle (2 x 9 mm)
Flat blade (Pappardelle) - width
of ribbon determined by width of
food
Crinkle cut
and is designed
cone holder
body
• Refer to the "service and customer
care" section to obtain additional cutting
cones.
to assemble your
spiralizer
1 Insert the cone holder
.
2 Fit the desired cutting cone
cannot be fitted if the cone holder or
cone are not located correctly. Ensure
that the cone sits flush with the holder.
3 Fit the lid
lid with the
clockwise until the
.
to use your spiralizer
• Before fitting the attachment, remove
the splashguard assembly.
1 Lift off the slow speed outlet cover
2 With the attachment in the position
shown , locate to the slow speed
outlet and rotate to lock in place.
3 Place a bowl under the cutting cone.
4 Cut the foods to fit the feed tube and
attach to the blade on the end of the
pusher.
5 Place the pusher in the food tube
ensuring the groove on the pusher aligns
with the rib in the feed tube.
6 Switch on to Max
pusher in position to guide the food
down the feed tube. Do not use
excessive force.
3
into the body
. The lid
and align the on the
on the body. Turn
aligns with the
and hold the
.