Moving The Massage Chair; Connecting To Power - Titan Summit Flex SL-Track Instruction Manual

PRELIMINARY CHECKS

Moving the Massage Chair

Roll the chair on its casters to the desired location.
Incline the backrest to upright position.
Turn off the power switch and unplug the appliance from the electrical outlet.
Using two people,push down on the backrest and lift up on the front side by grabbing
the moving Holder located to the front bottom of the armrest),roll the chair on its
casters to the desired location(check the sketch for reference).
CAUTION
Do not move the chair when there is user inside.
To carry this product, do not lift by the footrest or armrest,hold the chassis
and steady the backrest(have 4 or more people to carry the product).

Connecting to Power

Connect this appliance to a 3-wire properly grounded outlet.
Turn on the main power switch by the right hand side of the
massage chair.
CAUTION
Please verify that there is no damage to the supply cord before switching
on the massage chair.
Please verify that the main power switch is turned off before connecting to
power.
20