Laser 4837 Instructions

Incorrect or out of phase
engine timing can result in
damage to the valves.
The Tool Connection
cannot be held responsible
for any damage caused
by using these tools in
anyway.
Safety Precautions
– Please read
• Always read and follow the
manufacturer's instructions.
• Always wear gloves, safety
goggles and safety boots.
• Always tighten components
to the manufacturers
recommended torque
settings.
• Always turn engines in their
normal Direction of Rotation
(DOR).
• Avoid contaminating the
belt or pulleys with
lubricants and anti-freeze.
• Care should be taken to
avoid trapping fingers
between the belt and
pulley.
• The Tool Connection
Limited accept no
responsibility for damage to
the engine, belt, pulley's or
personnel through use of
this tool how so ever
caused.
Hints: for ease of use it is
recommended that spark
plugs/heater plugs be removed
to reduce the engine
compression.
Guarantee
If this product fails through faulty
materials or workmanship, contact
our service department direct on:
+44 (0) 1926 818186. Normal
wear and tear are excluded as are
consumable items and abuse.
Distributed by The Tool Connection Ltd
Kineton Road, Southam, Warwickshire CV47 0DR
T +44 (0) 1926 815000 F +44 (0) 1926 815888
info@toolconnection.co.uk www.toolconnection.co.uk
Stretch Belt
Fitting Tool
Instructions
www.lasertools.co.uk
4837