Dynamic Library Loading - HP zx2000 Supplementary Manual

configuring an X Server on HP-UX
Option
BlankTime
StandbyTime
SuspendTime
OffTime

dynamic library loading

The path for each dynamically loaded module must be specified in the ModulePath in order for
them to load. See the
Dynamically loaded modules are recorded by the X Server in the/var/X11/Xserver/logs
directory. The log file reflects the display identifier for a given run. Only the last invocation
against a given display identifier is retained. The log file contains the parsed contents of the
XF86Config file and the full path name for all dynamically loaded modules for the given X
Server invocation. Deferred loaded modules are recorded as they are referenced.
NOTE: Altering or removing files under /usr/lib/X11/Xserver prevents the Technical
Print Server from running. Altering or removing files under
/usr/lib/hpux32/X11/Xserver/modules/xf86 prevents the X Server from
running.
4–18
Options for ServerLayout Section
Value Default
time 10
time 20
time 30
time 40
Module section on page 4-8 for more details regarding the ModulePath.
Description
Sets the inactivity timeout for the blanking phase of
the screensaver. Time is in minutes. This is equivalent
to the Xserver's `-s' flag, and the value can be
changed at run time with xset(1).
Sets the inactivity timeout for the "standby" phase of
DPMS mode. Time is in minutes, and the value can be
changed at run time with xset(1).
Sets the inactivity timeout for the "suspend" phase of
DPMS mode. Time is in minutes, and the value can be
changed at run time with xset(1).
Sets the inactivity timeout for the "off" phase of DPMS
mode. Time is in minutes, and the value can be
changed at run time with xset(1).
Graphics Administration Guide