Page 1
Please read this document carefully before installation! New Generation ADSL Loop Extender Installation Manual Version: 008 Widearea Telecommunication Technology Co., Ltd Add: 2 East Round Longtan Industry Garden 10#,Chengdu, Sichuan, China Tel: (86)28 84207501 (86)28 84207506 Fax: (86)28 84209696 E-mail: master@widearea.com.cn...
Page 2
All brand names and trademarks are the property of their respective owners. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
ADSL Loop Extender is an active element installed in the outside loop plant. It operates as an amplifier and equalizes the signal. ADSL Loop Extender’ Box and the business card are as below: AER800-1PL Box: A Box for 1 AER800-C1PL embedded. AER800-4PL Box: A Box for 5 AER800-C1PL embedded. ...
New Generation ADSL Loop Extender Installation Manual Page 4 2. Technical Specifications Table 1 –Technical Specifications of AER800-1PL Box, AER800-4PL Box, AER800-8PL Box, business card AER800-C1PL Temperature -35℃~+65℃ Operating Environment Relative Humidity 5%~95% (Non-condensing) Input Power DC36V~DC72V Power Consumption Less than 0.1W( per port )
Page 6
568 ~ 1445 10.8 ~ 27.6 3.3 ~ 8.4 L(CO-Extender-CPE) 4. Physical Structure AER800-1PL Box: A Box for 1 AER800-C1PL embedded AER800-4PL Box: A Box for 5 AER800-C1PL embedded. AER800-8PL Box: A Box for 9 AER800-C1PL embedded. ...
Page 7
New Generation ADSL Loop Extender Installation Manual Page 6 4.1 AER800-1PL Box Figure 2 AER800-1PL Box Table 4 - Twist-pair Connection Description of AER800-1PL Color Connection Orange/White (A/B) to DSLAM Green/White (A/B) to Modem Blue/White (A/B) Brown/White (A/B) This publication may not be reproduced in whole or in part without the express written...
Figure 3 AER800-4PL Box Business card AER800-C1PL can be easily inserted into the Box. Wiring terminals on front panel for twist pairs connecting. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
Unpack equipment carefully; check for completeness against the purchase order. Notify the supplier if items are missing. Note: Save packing material. All equipment returned must be packed in the original packing material. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
Business Card Cables at DSLAM side or Correct cable status LED is Modem side are not connected connection connection. always on. properly. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
Page 11
The cable to CPE side is Avoid exposed connectors, connected with too many use good quality cable connectors. instead scattered connectors. This publication may not be reproduced in whole or in part without the express written permission of Widearea.
Need help?
Do you have a question about the AER800-1PL and is the answer not in the manual?
Questions and answers