Please read this document carefully before installation! ADSL Loop Extender (AER800-24P) Installation Manual Version: 001 Widearea Telecommunication Technology Co., Ltd Add: 2 East Round Longtan Industry Garden 10#,Chengdu, Sichuan, China Tel: (86)28 84207501 (86)28 84207506 Fax: (86)28 84209696 E-mail: master@widearea.com.cn...
Page 2
All brand names and trademarks are the property of their respective owners. This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
The new generations of line powered ADSL Loop Extenders consist of an enclosure and card system designed to offer a modular deployment option. The parts list is detailed below: AER800-24P Box: A Box for 24 AER800-C1P cards and 3 AER800-PWR cards, which are divided into 3 independent sub-systems. ...
ADSL Loop Extender Installation Manual Page 4 2. Technical Specifications Table 1 –Technical Specifications of AER800-24P Operating Temperature -40℃~+65℃ ~ Environment Relative Humidity (Non-condensing) Input Voltage DC60V~DC122V Power Consumption Less than 0.2W( per port ) Max. Output Current Less than 18mA for each power card (for eight ports )
415 ~ 1240 14.8 1.0 ~ 0.3 ~ L2(Extender-CPE) 83 ~ 1100 13.0 7.5 ~ 2.3 ~ L(CO-Extender-CPE) 635 ~ 1660 19.7 This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
570 ~ 1449 10.8 ~ 27.6 3.3 ~ 8.4 4. Products Structure AER800-24P Box: Enclosure for 24 AER800-C1P cards and 3 AER800-PWR cards. AER800-C1P: A one port ADSL Loop Extender designed to be inserted into the AER800-24P ...
ADSL Loop Extender Installation Manual Page 7 4.1 AER800-24P ADSL Loop Extender Modular card slots LED Power Indicator Card Area AER800-PWR Cards Terminal Area Ground Terminal CPE Cable Gland CO Cable Gland Figure 1 AER800-24P Overview This publication may neither be reproduced in whole nor in part without the express written...
Page 9
The Third External Terminals Row Figure 2 AER800-24P Terminals Area According to the connection diagram on the back of the door, terminals are connected to the card with the same code internally. Through the internal pairs, Extender cards are connected to the internal terminal.
Power output switch Figure 8 AEC-B4P Front View DC Power Input Terminal Ground Terminal Power Supply Output Terminal Figure 9 AEC-B4P Back View This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
Power Output Switch Power LED Figure 10 AEC-RACK Front View Standby DC Input Terminal DC Input Terminal Ground Terminal Figure 11 AEC-RACK Back View This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
Page 13
“COM ALM” In the upper left hand corner is only used for factory testing. The outlets “J1~J13” are the DC116V output terminals. AEC-C2P cards can supply 2хDC116V which allows a single card to power two lines. This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
(2) Before installation, the DC 48V or AC85V~AC265V power supply must be reliably grounded. (3) The power supply can also be installed in the CPE or near the ALE, if CO installation is not This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
The A and B wire should be isolated. 5.3 Install the ADSL Loop Extender (1) Install the AER800-24P Enclosure in the junction cabinet. Ground the Enclosure through the grounding screw located on the bottom outside the Box.
Reduce SNR Margin setting on the SNR Margin is too DSLAM until a connection is made. high. We suggest using SNR Margin < 10. This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
Page 17
Increase SNR Margin setting in the High. DSLAM. Data profile is too Lower the minimum data rate in the high for this circuit. DSLAM. This publication may neither be reproduced in whole nor in part without the express written permission of Widearea.
Need help?
Do you have a question about the AER800-24P and is the answer not in the manual?
Questions and answers