Customer Service or call a qualifi ed contractor. Manufacturer is not responsible for damage or injury caused by incorrect assembly or use. Features and Benefi ts The A401: A. Can be mounted to drywall, wood stud, or concrete. Level can be adjusted by ±7.5° post-installation.
Required Tools 11 mm 3 mm 10 mm 10 mm (7/16 in.) (1/8 in.) (3/8 in.) (3/8 in.) Supplied Parts and Hardware WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer;...
1 Determine Confi guration 1-1 Single shelf confi guration Your A401 is 166 mm (63⁄5 in.) high. Consider this when determining wall placement. See 1-2 for confi guration of multiple units. 1.34 14.50 33.9 368.3 18.00 457.2 POST INSTALLMENT 1" HIEGHT ADJUST POST INSTALLMENT ROLL 7.5...
Page 5
2 Mount the Wall Plate Wood stud 11 mm 3 mm (7/16 in.) (1/8 in.) 2-1 Locate stud Verify the center of the stud using an awl, a thin nail, or an edge to edge stud fi nder. CAUTION: Avoid potential personal injuries and property damage! Any material covering the wall must not exceed 16 mm (5/8 in.).
Page 6
2 Mount the Wall Plate Solid concrete or concrete block 11 mm 10 mm (7/16 in.) (3/8 in.) 2-1 Mark the wall IMPORTANT: For stacking confi gurations, stack from the top down. [01] Level the wall plate [01] and mark the hole locations. CAUTION: Avoid potential injuries or property damage! Mount the wall plate [01] directly onto the concrete...
Page 7
2 Mount the Wall Plate Drywall 10 mm (3/8 in.) 2-1 Mark the wall IMPORTANT: For stacking confi gurations, stack from the top down. Level the wall plate [01] and mark the hole locations. CAUTION: Avoid potential injuries or property damage! Mount the wall plate [01] directly onto the wall.
Page 8
3 Attach Glass to Wall Plate 3-1 Attach glass shelf Slide the glass shelf [02] into the wall plate [01]. Line up the holes in the shelf to the holes in the wall plate, as shown. [01] [02] 3-2 Secure glass shelf Secure the glass shelf [02] to the wall plate [01] using screws [08].
Manage Cables 4-1 Single shelf confi gurations Cables can be routed through the opening in the lower back of the wall plate [01]. [01] 4-2 Stacked confi gurations Cables can be routed through the inside of the wall plates [01] for stacked confi gurations.
Page 10
5 Adjustments Adjust the height using the allen key [10]. Adjust level by hand. Tighten using the allen key [10]. [10] Reattach the top (T) and front (F) covers. [10] Milestone AV Technologies and its affi liated corporations and subsidiaries (collectively, “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions, or variations.
Need help?
Do you have a question about the A401 and is the answer not in the manual?
Questions and answers