Crunch BLACK Series Operation Manual page 24

2. Check the fuse that controls power to the cigarette lighter socket. See
your vehicles owner's manual
3. The cigarette lighter socket might be dirty. Clean it with fine emery cloth
to ensure a good, clean connection.
4. Vehicle electrical problem exists.
5. Make sure that the volume control is in the ON position.
Caution: Do not place any metal object other than the cigarette lighter or a
cigarette lighter plug in the cigarette lighter socket.
If the detector gives a false alert when the vehicle hits or bumps:
1. Check the vehicle's electrical system, including main battery cable and
alternator connections.
2. Install a filter capacitor (470uF.25volts) on the back of the cigarette
lighter socket, across the power connections.
If the receiving signals are weak:
1. Check the angle of detector.
2. Point detector to the horizon.
3. Radar antenna / laser sensor is obstructed.
Relocate the detector clear of any obstruction outside the windshield,
4.
such as a wiper blade (see mounting manual).
23
Интернет-магазин автотоваров «130»