Table of Contents
Advertisement
Operating the appliance
en
Observe the maximum specified
■
load. Overfilling adversely affects the
washing result and promotes
creasing.
Unfold presorted laundry items and
1.
place them in the drum.
Make sure that no items of laundry
2.
are trapped between the door and
the rubber seal, and close the door.
The indicator light for the Start/Pause
button flashes. It is possible to change
the settings.
Measure and add detergent
and care products
Caution!
Damage to the appliance
Cleaning agents and agents for
pretreating laundry (e.g. stain removers,
prewash sprays, etc.) may cause
damage if they come into contact with
the surfaces of the washing machine.
Do not allow these agents to come into
contact with the surfaces of the washing
machine. If necessary, immediately wipe
away spray residue and other residues/
droplets with a damp cloth.
Measuring
Measure the detergent and care
products according to:
Water hardness (ask your water
■
supply company)
The manufacturer's instructions on
■
the packaging
The amount of laundry
■
Soiling ~ Page 11
■
16
Filling
:
Warning
Eye/skin irritation!
Detergent and care products may spray
out if the detergent drawer is opened
while the machine is in operation.
Open the drawer carefully.
Rinse eyes or skin thoroughly if they
come into contact with detergent/care
products.
If swallowed accidentally, seek medical
advice.
Dilute viscous fabric softener and
Note:
fabric conditioner with water; this
prevents blockages.
Pour the detergent and care products
into the appropriate compartments:
Measuring aid A For liquid detergent
Compartment II
Detergent for the main wash,
water softener, bleach, stain
remover
Compartment i Softener, starch.
Do not exceed the maximum
Compartment I
Detergent for prewash
Pull out the detergent drawer as far
1.
as possible.
Add detergent and/or care products.
2.
Close the detergent drawer.
3.
Advertisement
Table of Contents
