Advertisement

SIP Emergency Station

(1) Introduction

WatchNET's SIP Emergency station AVCEM1 is a commercial grade full metal body intercom that is
weather proof and easy to install. SIP technology enables easy communication with any EPBX or SIP
telephone.

(2) Wiring

(3) Power

The SIP Emergency station supports POE (Power over Ethernet) or 12V DC

(4) Powering up Video Door Station

a) The Video Door Station is set to DHCP by default, make sure to plug in the door Station to
network
b) To get the IP address press and hold the call button for 5 seconds and a voice prompt will
announce the IP of the Door Station
c) Login using Web browser and enter the IP address of the video station into the address bar, the
default username is: "admin" & password: "admin"
AVCEM1 Quick Guide
Ver. 03122019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AVCEM1 and is the answer not in the manual?

Questions and answers

Summary of Contents for WatchNet AVCEM1

  • Page 1 SIP Emergency Station AVCEM1 Quick Guide (1) Introduction WatchNET's SIP Emergency station AVCEM1 is a commercial grade full metal body intercom that is weather proof and easy to install. SIP technology enables easy communication with any EPBX or SIP telephone.
  • Page 2 Make sure to configure the SIP account or configure the correct IP if using IP to IP calling Note: if any solutions above did not work please contact WatchNET Technical Support phone number +1-866- 843-6865 or visit our website @ www.watchnetinc.com...

Table of Contents