Download Print this page

WatchNet AVCDS1 Quick Manual

Sip video door station
Hide thumbs Also See for AVCDS1:

Advertisement

Quick Links

SIP Video Door Station
(1) Introduction
WathcNET's Video Door Station (AVCDS1) is a commercial grade full metal body intercom that is
weather proof and easy to install. SIP technology enables easy communication with any EPBX or SIP
telephone, once registered with SIP server the door station can call landline or mobile phone for video
and audio communication.
(2) Wiring
(3) Power
The Video Door Station supports POE (Power over Ethernet) or 12V DC
(4) Powering up Video Door Station
a) The Video Door Station is set to DHCP by default, make sure to plug in the door Station to
network
b) To get the IP address press and hold the call button for 5 seconds and a voice prompt will
announce the IP of the Door Station
c) Login using Web browser and enter the IP address of the video station into the address bar, the
default username is: "admin" & password: "admin"
AVCDS1 Quick Guide
Jumper
Connection
GND
12V
RS485-A
7 PIN
RS485-B
(Vertical)
DOOR1
GND
DOOR2
GND
NC1
COM1
7 PIN
NO1
(Horizontal)
NC2
COM2
NO2
Ethernet
Ethernet (POE)
Description
Power Supply
RS 485
Input 1 (Door Sensor)
GND for Input
Input 2 (REX)
Reserved
Relay 1
Relay 2
Ethernet Port

Advertisement

loading

Summary of Contents for WatchNet AVCDS1

  • Page 1 AVCDS1 Quick Guide (1) Introduction WathcNET’s Video Door Station (AVCDS1) is a commercial grade full metal body intercom that is weather proof and easy to install. SIP technology enables easy communication with any EPBX or SIP telephone, once registered with SIP server the door station can call landline or mobile phone for video and audio communication.
  • Page 2 Make sure to configure the SIP account or configure the correct IP if using IP to IP calling Note: if any solutions above did not work please contact WatchNET Technical Support phone number +1-866- 843-6865 or visit our website @ www.watchnetinc.com...