Table of Contents
Advertisement
SETTING THE CLOCK
1.
Touch CLOCK pad.
2.
Use the number pads to enter the correct time. Your must touch at least three numbers to set the clock (one for
hour and two for minutes).
3.
Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is first plugged in or when power resumes after a power interruption, the
display will show ENTER CLOCK TIME. If you prefer to not have the clock displayed, touch RESET.
SETTING THE TIMER
1.
Touch TIMER.
2.
Enter the amount of time by touching the number pads
3.
Touch START/STOP.
NOTE:
·Time countdown can be seen in display for 5 seconds before clock or cooking time is returned to display.
·Touch TIMER and then touch START/STOP to cancel TIMER during timing process.
SETTING A COOKING PROGRAM
A.
One-stage Cooking
1.
Use the number pads to set a cooking time. You can set a cooking time from one second to 99 minutes and 99
seconds.
2.
The default setting is 100% microwave power output. If you want to set a power level other than 100%, touch
POWER, and then use the number pads to enter the power level.
3.
Touch START/STOP to start cooking.
Use single digits to set a cooking power level:
Number pad
9
8
7
6
5
4
3
2
1
OPERATION INSTRUCTIONS (continued)
Cooking power
90%
80%
70%
60%
50%
40%
30%
20%
10%
8
Advertisement
Table of Contents
