Advertisement
Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.
CARTON CONTENTS:
Description
Fountain
Pump
Arched Top
Wing Nut
Compatible Pumps for this fountain:
Pump Model No.
JR600
JB650
YH560
Tools required for assembly: No tools required for assembly.
Assembly Instructions:
1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. From the base of the arched fountain top, guide the water tube through the opening at the back top of the
fountain base. Attach the water supply tube to the pump, and place the pump in the basin. Guide the
electrical pump cord through the same opening, and out the back of the fountain. Line up the fountain top
to the base, and secure with the wing nuts provided.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
8. Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
Patina/Stone Finish Arched Top and Rectangular Base Patio Fountain
WHF726
Quantity
1
1
1
2
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Luxen Home WHF726
Summary of Contents for Luxen Home WHF726
- Page 1 Product Name: SKU #: WHF726 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY. Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged parts.
- Page 2 Patina/Stone Finish Arched Top and Rectangular Base Patio Fountain Product Name: SKU #: WHF726 9. Check the area around your fountain on a regular basis to ensure that there is no leakage. 10. Please refresh the fountain with water each week to ensure it in good condition.
- Page 3 Instruction Manual Please save this manual for future reference. Patina/Stone Finish Arched Top and Rectangular Base Patio Fountain Product Name: SKU #: WHF726 Pump Instructions: Special Warnings and Cautions: CAUTION: • The pump has been evaluated for use with water only.
- Page 4 Patina/Stone Finish Arched Top and Rectangular Base Patio Fountain Product Name: SKU #: WHF726 WARNINGS: 1. To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle. 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension.
- Page 5 Patina/Stone Finish Arched Top and Rectangular Base Patio Fountain Product Name: SKU #: WHF726 TIPS AND TROUBLESHOOTING: 1. Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to the desired level.
Need help?
Do you have a question about the WHF726 and is the answer not in the manual?
Questions and answers