Vectra Products Comparison - HP Vectra XU5 Supplementary Manual

Hp vectra xu5: supplementary guide
Hide thumbs Also See for Vectra XU5:
Table of Contents

Advertisement

Vectra Products Comparison

This table compares the HP Vectra XU PCs with the HP Vectra XM 486 and HP Vectra XP
PCs.
HP Vectra 486
Component
XM series
Microprocessor
486s/33: 486SX-33
486/33:
486/50:
486/66:
Main Memory
32 or 36-bit (80 ns)
· Standard
4 or 8 MB
64 MB
· Maximum
Level-one cache
8 KB (on the
memory
microprocessor)
Level-two cache
0, 128, or 256 KB
memory
write-through (on the
system board)
Video adapter
Integrated HP Ultra
VGA 2 (1 MB
memory, upgradable
to 2 MB)
Hard Disk Drive
Integrated IDE adapter
adapter
Mass storage
Integrated ports
Accessory board
Four 16-bit ISA
slots
Network Interface
Power supply
75 W (full range
90-264 VAC)
Security
Passwords
Preinstalled
software
BIOS ROM
Vectra XU Familiarization Guide
HP Vectra XP series
XP/60: 60 MHz Pentium
486DX-33
XP/66: 66 MHz Pentium
486DX2-50
486DX2-66
36-bit (70 ns)
8 MB
192 MB
256 KB write-through (on
the system board)
Integrated HP Ultra VGA
on PCI bus (2 MB video
memory, upgradable to 4
MB)
One front-access 3.5-inch shelf
One front-access 5.25-inch shelf
Two internal 3.5-inch shelves for hard disk drives
1 Bidirectional parallel port
2 Serial ports
1 Infrared link
Two 16-bit ISA
One 16-bit PCI
One ISA or PCI
Integrated Ethernet with UTP connector (optional
board provides coaxial connector)
100 W (full range 90-132
VAC and 198-264 VAC)
Keyboard lock, User Password prompt, mechanical cover lock, disk and port
disabling Power-on button and [ R ESET] button disabling
User Password and System Administrator Password
MS-DOS, Windows, HP Dashboard, software drivers,
and HPROMInit
Product Overview and Features
HP Vectra XU series
XU 5/75: 75 MHz Pentium
XU 5/90: 90 MHz Pentium
XU 5/90C: 90 MHz Pentium
XU 5/100C: 100 MHz Pentium
32-bit (70 ns)
8 or 16 MB
256 MB
8 KB for code, 8 KB for data
(both on the microprocessor)
256 or 512 KB write-back, on
the system board (burst
synchronous on C models)
Integrated HP Ultra VGA on
PCI bus (2 MB> video
memory) Matrox Video
Adapter board on C models,
2MB video memory
upgradable to 4 MB)
Integrated Enhanced IDE
and Fast SCSI-2 adapters on
PCI bus
One front-access 3.5-inch
shelf
One front-access 5.25-
inch shelf
One 5.25-inch shelf for a
front-access device or
hard disk drive
One internal 3.5-inch
shelf for a hard disk
drive
1 ECP/EPP bidirectional
parallel port
1 Serial port
Three 16-bit ISA
One 32-bit PCI
One combination ISA or PCI
Integrated Ethernet interface
on PCI bus, with one RJ-45
UTP and one BNC coaxial
connector
120 W (full range 90-264
VAC)
MS-DOS, Windows, HP
Dashboard, software drivers,
Plug and Play utilities, and
HPROMInit
Flash ROM
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra xu seriesVectra xu 5/xx

Table of Contents