HP Vectra XU5 Reference Manual page 15

System Board
Main Memory
Module sockets
Level-two
cache memory
Main processor
socket
Dual Processor
socket
The main features of the system board are:
a Pentium 75, 90 or 100 MHz microprocessor
a socket for a dual companion processor
a PCI bus video controller:
the HP Vectra XU 5/75 and XU 5/90 has an integrated Ultra VGA+ video controller
on the PCI bus with 2 MB of video memory (for 1280 x 1024 resolution in 256 colors)
the HP Vectra XU 5/90C and XU 5/100C do not have an integrated video controller.
They are supplied with a pre-installed Matrox MGA PCI/2+ video board or a Matrox
Impression Plus video board. Both Matrox video boards have 2 MB of video memory
(for 1600 x 1200 resolution in 256 colors). The video boards can be upgraded to 4
MB (for 1600 x 1200 in 64K colors).
a combined LAN/SCSI controller on the PCI bus
an Enhanced IDE controller on the PCI bus, with one IDE device connector
an integrated flexible disk controller for two flexible disk drives
eight sockets for DRAM main memory modules--allowing installation of up to 256 MB
a system ROM (using flash ROM technology) that can be easily updated using an
HPROMInit, containing:
the BIOS
a power-on hardware test that allows you to view the results of the diagnostics as
well as a corrective action message
SETUP in local language with context-sensitive help
LAN boot code (to start the PC from a LAN server) for use with Ethernet LAN
adapters and either a Novell Netware or LAN Manager server
Vectra XU Technical Reference
PCI accessory board slot
Combination PCI or ISA slot
System Overview
ISA accessory
board slots
15