How To Use An Easy Adjust Type Clasp - Seiko 6R20 Instructions Manual

Pull the pin out of an adjustment hole of the
3
band. Slide the band to adjust its length and
find an appropriate hole. Place the pin into the
2
hole.
Pin
Adjustment hole
Adjustment hole
Pin
36
EN
● How to wear the band (Opening and closing the clasp)
1. Lightly press the push buttons to open the
2
clasp.
* Note that pressing the push buttons too
firmly (deeply) actuates the adjuster, which
lengthens the band.
2. Fasten the clasp by pressing the frame of
the buckle.
38
EN
Fasten the flap.
4
Push button Buckle

How to use an easy adjust type clasp

Some bands are provided with an easy adjust type clasp for fine adjustment of the band's length.
If the clasp of the watch you purchased is as follows, please refer to the following instructions.
* The band can be lengthened by up to about 5 mm.
This is useful if the band feels too tight or is uncomfortable for some reason.
● How to adjust the length of the band
1. You can lengthen the band by up to about 5 mm
(2 stages) by firmly pressing the push buttons
from both sides to actuate the adjuster.
* The above illustrations are provided as examples. Some details may differ depending on the model.
EN
2. Fasten the clasp by pressing the frame of the
buckle.
* Even while the clasp is closed, you can still retract
the length of band extended by the adjuster.
EN
2
37
2
39