Advertisement
Quick Links
In accordance with point 1.7.4, to I, Dir. CEE 89/392
0.0
INTRODUCTION AND WARNING
1.0
DESCRIPTION OF THE PUMP
2.0
TECHNICAL SPECIFICATIONS
3.0
CORRECT USE
4.0
INSTRUCTIONS FOR ORDERING AND
DISTRIBUTORS
DECLARATION OF CONFORMITY
Registered name
Address
Model
Year of manufacture
Marking
Pneumatically driven pump
Type 3413...
Type 31040..
DROPSA SpA
DROPSA SpA
via Croce 1, 20090 Vimodrone (MI), Italy
Pneumatically/hydraulically driven pump 3413--- & 31040
1990
CE
INSTRUCTIONS
FOR USE
Catalogue P/N C2008IE - Wk 05/99
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for DROPSA 3413 Series
Summary of Contents for DROPSA 3413 Series
- Page 1 INSTRUCTIONS FOR USE Pneumatically driven pump Type 3413… Type 31040.. DROPSA SpA In accordance with point 1.7.4, to I, Dir. CEE 89/392 INTRODUCTION AND WARNING DESCRIPTION OF THE PUMP TECHNICAL SPECIFICATIONS CORRECT USE INSTRUCTIONS FOR ORDERING AND DISTRIBUTORS DECLARATION OF CONFORMITY...
-
Page 2: Description Of The Pump
Dropsa SpA Sales Department should be contacted without delay. DROPSA S.p.A. declines to accept any responsibility for injuries to persons or damage to property in the event of the non-observance of the information presented in this manual. -
Page 3: Technical Specifications
Accessories As per specific request. TECHNICAL SPECIFICATIONS Methods of commanding the pump Manual push-button control Supply Discharge 3-way solenoid valve control Supply Discharge Mechanical roller or cam bar control Supply Discharge C20008IE – Pneumatically driven pump - Rev. 0 February 99 Page 3 of 9... -
Page 4: Correct Use
♦ DO NOT use aggressive lubricants with NBR gaskets and seals; if in doubt consult the Engineering Department of Dropsa SpA, who will provide a chart with the details of recommended oils. ♦ DO NOT ignore dangers to health and observe all hygiene standards. - Page 5 (if doubt exists as to the correct functioning consult the Engineering Department of Dropsa SpA to request test procedures). Transport and storage Transport and storage is effected in a cardboard package.
- Page 6 • the pump fails to deliver oil at the prescribed pressure In case of doubts and/or problems which cannot be resolved do not attempt to disassemble parts of the machine but contact the Engineering Department of DROPSA S.p.A. C20008IE – Pneumatically driven pump - Rev. 0...
- Page 7 ♦ use of unsuitable lubricant -> the characteristics of the fluid are shown on the pump and in the manual (in case of doubt contact the Eng. Dept of Dropsa Spa) ♦ protection against direct and indirect contact must be provided by the user ♦...
- Page 8 INADMISSIBLE FLUIDS Fluids Danger Lubricants with abrasive additives High wear rate of contacted parts Lubricants with silicone based additives Seizure of the pump Petrol – solvents – inflammable liquids Fire – explosion – damage to seals Corrosive products Corrosion of the pump– injury to persons Water Oxidation of the pump Food substances...
- Page 9 EN 292/1, EN 292/2, EN 50081-2, EN 50082-2, CEI EN 60204-1, EN 1050. Technical manager Ing. Walter Divisi Product manager Name DROPSA SpA - Vimodrone (MI) - Italy Company February 1999 Signature Date DROPSA DISTRIBUTORS C20008IE –...
Need help?
Do you have a question about the 3413 Series and is the answer not in the manual?
Questions and answers