Rev. A, March 2022
6 Setting up your ART/SRT Removal Tool
6.1
Attachment Plate Selection
a. Prior to Stud removal, ensure the correct attachment plate has been selected. A labeled
machine and transverse attachment plate has been provided. This allows users to
remove Studs in any direction (See Figure 5.1). Contact DemTech Services to ensure
you have the correct attachments for the job.
SRT‐030, Transverse Direction
ART‐010, Transverse Direction
Page 5
SRT‐035, Machine Direction
ART‐025, Machine Direction
Figure 5.1
SRT Operator's Manual