Table of Contents
Advertisement
Rev. A, March 2022
2 General Safety & Maintenance Information
The DEMTECH Services, Inc. Stud/Anchor Removal Tool system, hereinafter referred to
as the SRT is a high voltage piece of equipment. Always disconnect the power before
performing any service and/or maintenance. At all times while operating the SRT keep
hands, fingers, and other body parts well clear of the router bit.
2.1
Intended Use
The SRT Removal Tool is intended as professional use equipment and is not intended for
sale to the general public.
The SRT has been manufactured utilizing the latest technology and current safety
standards and regulations. However, improper use or abuse may lead to hazardous
conditions for the user or other personnel or cause damage to the SRT.
Always keep this manual with the SRT at or near the location where the SRT is being used
so that it can be referred to quickly and easily.
The technician assigned to operate this SRT must have read through and become familiar
with this manual, particularly all safety information, before operating the SRT.
No changes and/or modifications shall be made to the SRT especially as it relates to safety.
2.2
Maintenance
Maintenance, inspection and adjustment of the SRT shall only be carried out by qualified
personnel. Before removing or installing spare parts or performing other repair operations
to the SRT, consult DEMTECH Services, Inc. or your authorized DEMTECH service
center for advice on proper procedures. This will help insure a safe and successful
outcome. Always make sure all screw connections are tight before attempting to operate
the SRT after maintenance and/or repair procedures. Also make sure all covers, guards,
and other safety devices have been fully reinstalled before use.
Page 2
SRT Operator's Manual
Advertisement
Table of Contents
