Table of Contents
Advertisement
Digit Store : This command allows a phone
number to be stored as a name tag by
entering the digits one at a time.
Delete : This command is used to delete
individual name tags.
Delete All Name Tags : This command
deletes all stored name tags in the
Hands-Free Calling Directory.
Using the Store Command
1. Press and hold
/
for two seconds.
2. Say Store.
3. Say the phone number or group of
numbers you want to store all at once
with no pauses, then follow the
directions given by the system to save a
name tag for this number.
Using the Digit Store Command
If an unwanted number is recognized by the
system, say Clear at any time to clear the
last number.
To hear all of the numbers recognized by
the system, say Verify at any time.
1. Press and hold
/
for two seconds.
2. Say Digit Store.
3. Say each digit, one at a time, that you
want to store. After each digit is entered,
the system repeats back the digit it
heard followed by a tone. After the last
digit has been entered, say Store, and
then follow the directions given by the
system to save a name tag for this
number.
Using the Delete Command
1. Press and hold
/
for two seconds.
2. Say Delete.
3. Say the name tag you want to delete.
Using the Delete All Name Tags Command
This command deletes all stored name tags
in the Hands-Free Calling Directory.
To delete all name tags:
1. Press and hold
/
for two seconds.
2. Say Delete all name tags.
Listing Stored Numbers
The list command will list all stored
numbers and name tags.
Using the List Command
1. Press and hold
/
for two seconds.
2. Say Directory.
Infotainment System
3. Say Hands-Free Calling.
4. Say List.
Making a Call
Calls can be made using the following
commands.
Dial or Call : The dial or call command can
be used interchangeably to dial a phone
number or a stored name tag.
Digit Dial : This command allows a phone
number to be dialed by entering the digits
one at a time.
Re-dial : This command is used to dial the
last number used on the cell phone.
Using the Dial or Call Command
1. Press and hold
/
for two seconds.
2. Say Dial or Call.
3. Say the entire number without pausing,
or say the name tag.
Once connected, the person called will be
heard through the audio speakers.
Calling Emergency
1. Press and hold
/
for two seconds.
The system responds Ready, followed
by a tone.
109
Advertisement
Chapters
Table of Contents
