GMC Chevrolet Express 2022 Owner's Manual page 109

108 Infotainment System
If multiple paired cell phones are within
range of the system, the system connects
to the first available paired cell phone in
the order that they were first paired to
the system. To connect to a different
paired phone, see Connecting to a
Different Phone later in this section.
Pairing a Phone
1. Press and hold / for two seconds.
2. Say Bluetooth. This command can be
skipped.
3. Say Pair. The system responds with
instructions and a four-digit Personal
Identification Number (PIN). The PIN is
used in Step 5.
4. Start the pairing process on the cell
phone that you want to pair. For help
with this process, see the cell phone
manufacturer's user guide.
5. Locate the device named Your Vehicle
in the list on the cell phone. Follow the
instructions on the cell phone to enter
the PIN provided in Step 3. After the PIN
is successfully entered, the system
prompts you to provide a name for the
paired cell phone. This name will be used
to indicate which phones are paired and
connected to the vehicle. The system
responds with <phone name> has been
successfully paired after the pairing
process is complete.
6. Repeat Steps 1 5 to pair additional
phones.
Listing All Paired and Connected Phones
The system can list all cell phones paired to
it. If a paired cell phone is also connected to
the vehicle, the system responds with is
connected after that phone name.
1. Press and hold / for two seconds.
2. Say Bluetooth.
3. Say List.
Deleting a Paired Phone
If the phone name you want to delete is
unknown, see Listing All Paired and
Connected Phones.
1. Press and hold / for two seconds.
2. Say Bluetooth.
3. Say Delete. The system asks which
phone to delete.
4. Say the name of the phone you want to
delete.
Connecting to a Different Phone
To connect to a different cell phone, the
Bluetooth system looks for the next
available cell phone in the order in which all
the available cell phones were paired.
Depending on which cell phone you want to
connect to, you may have to use this
command several times.
1. Press and hold / for two seconds.
2. Say Bluetooth.
3. Say Change phone.
If another cell phone is found, the
response will be <Phone name> is
now connected.
If another cell phone is not found,
the original phone remains
connected.
Storing and Deleting Phone Numbers
The system can store up to 30 phone
numbers as name tags in the Hands-Free
Directory.
The following commands are used to delete
and store phone numbers.
Store : This command will store a phone
number, or a group of numbers as a
name tag.