Connecting To A Network (Some Models Only) - HP Vectra VL6 7 User Manual

1 Setting Up and Using Your PC

Connecting to a Network (Some Models Only)

Connecting to a Network (Some Models Only)
Let your Network Administrator know you are connecting your PC to
the network.
Connect the network cable to the RJ-45 UTP (Unshielded Twisted
Pair) LAN connector.
10/100BT
Connector
Once you have connected the network cable to your PC, you must
enable your network connection in the PC's Setup program. (To enter
the PC's Setup program, press during start-up.)
English 9