Matrox Mga Millennium Ii Graphics Controller Board - HP Vectra VL6 6 Technical Reference Manual

Hardware and bios
Hide thumbs Also See for Vectra VL6 6:
Table of Contents

Advertisement

3 Interface Devices and Mass-Storage Drives

Matrox MGA Millennium II Graphics Controller Board

Matrox MGA Millennium II Graphics Controller Board
Some models are supplied with a Matrox MGA Millennium PCI graphics
controller on a board fitted in a PCI accessory slot. The on-board MGA-
2064W processor communicates with the Pentium II processor along the
PCI bus. The controller can be characterized as follows:
• 100% hardware- and BIOS-compatible with IBM
• 64-bit video memory access
• Hardware acceleration of graphical user interface (GUI) operations
• Support for up to 8 MB Window RAM (WRAM) at 50 ns
• Integrated 24-bit, 220 MHz RAMDAC
• Pixel clock maximum frequency of 135 MHz
• Green power saving features
• Standard and Enhanced Video Graphics Array (VGA) modes
• Acceleration for 3D, playback, MPEG (when an optional upgrade module
from Matrox is fitted), continuous interpolation on X, replication on Y
• DDC 2B compliant.
Matrox VESA connector
Media XL connector
44
VESA pass-through connector
4 MB memory chips
®
VGA display standard
Top and bottom halves of the
upgrade socket. (For the
installation of a video memory
upgrade module or the Matrox
MPEG module).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra vl 6/xxx series

Table of Contents