Assembly Of The Snapgrid ® For Cl21, Cl42 And Cl44; Assembly Of The Softboxes For Cl21, Cl42 And Cl44; Assembly Of The Skirt For Cl21 And Cl42 - CARPETLIGHT CL21 Instruction Manual

Assembly of the SNAPGRID for CL21, CL42 and CL44
®
The original CARPETLIGHT SNAPGRID has been designed specifically for the
®
respective lamp sizes. It can be attached using the velcro fasteners which surrounds
the lamp body, or alternately directly to the softbox. Additional rubber straps can be
tightened over the four corners using the pins. Both velcro fasteners and rubber straps
provide enough support to use the lamp as a top light.
To prevent light being emitted from the lamp corners useꢀ ꢀ theꢀ ꢀ protrudingꢀ ꢀ velcro strips.
Please check for possible fouling of the velcro fasteners to ensure a perfect bond.

Assembly of the softboxes for CL21, CL42 and CL44

Both CARPETLIGHT softboxes can be connected using the quick straps (push/pull
operation) over the respective pins and using the velcro fasteners at the corners of
the lamp head. To assemble the CL21 softbox, please screw in the treaded pins
provided. For the assembly of CL40-series please snap in the dual-distance-pins
provided and attach the softbox to the lamp head using the quick straps and velcro.
To span the softbox please push the pull-outs of the frame to a maximum.

Assembly of the skirt for CL21 and CL42

When ꢀ ꢀ u singꢀ ꢀ theꢀ ꢀ lampꢀ ꢀ asꢀ ꢀ a ꢀ ꢀ t opꢀ ꢀ l ight, ꢀ ꢀ i t ꢀ ꢀ i s ꢀ ꢀ r ecommendedꢀ ꢀ forꢀ ꢀ some ꢀ ꢀ a pplicationsꢀ ꢀ to ꢀ ꢀ u seꢀ ꢀ theꢀ ꢀ
black skirt, to narrow down the light angle even further. The skirt can be used
separately or in combination with the softbox and/or the SNAPGRID . Simply ꢀ ꢀ a ttach
®
ꢀ ꢀ t he ꢀ ꢀ v elcro ꢀ ꢀ a ffixed ꢀ ꢀ t o ꢀ ꢀ t heꢀ ꢀ skirtꢀ ꢀ to ꢀ ꢀ t he ꢀ ꢀ v elcro ꢀ ꢀ a ttached ꢀ ꢀ t oꢀ ꢀ the ꢀ ꢀ l amp ꢀ ꢀ h ead ꢀ ꢀ o rꢀ ꢀ its ancillary
equipment.
24