Page 1
SAFETY AND OPERATING MANUAL Oscillating Multi-tool KUW58 KUW58.1...
Page 3
Stay alert, watch what you are doing and Check for misalignment or binding of use common sense when operating a moving parts, breakage of parts and any power tool. Do not use a power tool while Oscillating Multi-tool KUW58 KUW58.1...
Page 4
Wear ear protection business location etc. can be found at website http:// abr.business.gov.au. ABN of Positec Australia Pty Limited is 14 101 682 357 Wear eye protection Wear dust mask Oscillating Multi-tool KUW58 KUW58.1...
See Fig. E TECHNICAL DATA Using the Variable Speed Dial See Fig. F Type Designation KUW58 KUW58.1 (W58 - designation of machinery, representative of The Variable Speed Dial can be used to set the Sonicrafter) optimum oscillating frequency according to the accessories used and the respective application.
Page 8
APPLICATION Warning: the sawing teeth are very sharp. Do not touch during mounting and application. The workpiece must be clamped tightly before it is cut. Universal-Fit accessories available from Kress. Accessories work with other competitive tools. NAME APPLICATION Wood, plastic, fiberglass, nails, non-...
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. Positec Australia Pty Limited 10 Corporate Blvd Bayswater, VIC 3153, Australia Oscillating Multi-tool KUW58 KUW58.1...
Need help?
Do you have a question about the KUW58 and is the answer not in the manual?
Questions and answers