Honda TRX500FM6 Owner's Manual page 29

Indicators & Displays
Lamp Check
Initial lamp check:
The indicators come on for a few seconds and then go off when you
turn the ignition switch to ON (q).
The PS (Electric Power Steering) indicator comes back on and
remains on until the engine is started after initial lamp check.
The high coolant temperature indicator and PGM-FI indicator come
back on for a few seconds and then go off after initial lamp check.
These indicators are identified in the table on page 21 with the
words: Lamp Check.
When applicable, the reverse or neutral indicator comes back on and
remain on until you shift out of reverse or neutral after initial lamp
check.
When applicable, the differential lock indicator comes back on and
remains on until you shift out of the front differential lock mode
after initial lamp check.
If one of these indicators does not come on when it should, have
your dealer check for problems.
Instruments & Controls 19