Taking Pictures At A Set Interval (Interval Shot) - Ricoh WG-80 Operating Manual

Taking Pictures at a Set Interval (Interval Shot)

In this mode, a set number of pictures can be taken automatically at a set interval
from a set time.
Interval 10 sec. – 99 min.
Number 2 shots – number of
of Shots recordable images
Start Delay 0 min. – 24 hours
3
1
Use the four-way controller (2345) to select
Shot) from the Capture Mode Palette.
2
Press the 4 button.
The current interval shot settings appear for approximately 1 minute. To take
pictures with the current settings, go to step 10.
3
Press the 4 button while the current settings are displayed.
The [Interval Shot] setting screen appears. [Interval] is marked with the frame.
4
Set the interval.
1 Press the four-way controller (5).
2 Use the four-way controller (23)
to set the minutes, then press the
four-way controller (5).
3 Use the four-way controller (23)
to set the seconds, then press the
four-way controller (5).
The frame returns to [Interval].
5
Press the four-way controller (3).
The frame moves to [Number of Shots].
6
Set the number of shots.
1 Press the four-way controller (5).
2 Use the four-way controller (23) to set [Number of Shots],
then press the four-way controller (5).
The frame returns to [Number of Shots].
66
You can set the shooting interval in increments of one
second from ten seconds to 4 minutes, and in 1 minute
increments from 4 to 99 minutes. You cannot set the
camera to take interval shots at less than ten seconds.
You can set this up to 1000 shots. However, it
cannot exceed the number of recordable images.
You can set this in 1-minute increments. If the start
time is set to 0 minutes, the first picture is taken as
soon as the shutter release button is pressed.
Interval Shot
Interval
Number of Shots
Start Delay
MENU
(Interval
0 10
min. sec.
2
0 0
hr. min.