Advertisement
Ademco Vista 20 Quick Guide
For more information on this topic please visit the complete
Battery
The Ademco Vista 20 operates on a
Bypass Protected Areas
Bypassing a zone allows you to arm your system with certain protected areas intentionally
unarmed or to access a protected area when the system is armed.
To bypass a zone, enter your [security code] + [BYPASS] + [2-digit zone number].
To unbypass a zone, enter your [security code] + [OFF].
For more information on this topic please visit the complete
Chimes and Beeps
When your system is in chime mode, a chime alert will sound three tones whenever a
protected door/window is opened.
To turn the door chime function on and off, enter your [security code] + [9].
For more information on this topic please visit the complete
Reset
To clear the display after an alarm event, enter your [security code] + [OFF] to clear the alarm
event history.
Security Codes
Your system allows for 14 additional security codes for use by other users, however only the
Master user can assign user codes to users.
To add a user code, enter your [Master code] + [8] + [new user number] + [ 4-digit new
user's code].
To delete a user code, enter your [Master code] + [8] + [user number]. Wait approximately
three seconds for the keypad to verify.
For more information on user codes, please view the
Trouble Conditions
https://alpha.adt.com/help/156[11/13/2018 7:41:51 PM]
Ademco Vista 20
Battery Replacement Page.
Ademco Vista 20
manual.
Ademco Vista 20
manual.
Ademco Vista 20
manual.
manual.
Advertisement
