Advertisement
General Description
Installing Batteries in the Romote Control
Installing Batteries
Open the battery compartment
1
cover on the back side.
Insert two AAA batteries inside the battery
2
compartment with their + and – ends
aligned as indicated. Do not mix old and
new batteries or different types of
batteries.
3
Close the cover.
Batteries should last for 1 year under normal use.
If you do not intend to use the remote control for a long period of time, remove
the batteries to prevent damage due to leakage.
Do not use old and new batteries together.
The batteries or battery pack shall not be exposed to excessive heat such as
direct sunlight, fire, or other heat sources.
External Connection
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Antennas with 300ohm flattwins Leads
Use a 75ohm - 300ohm converter
ANT IN
300ohm coaxial cable
Antenna feeder
Antennas with 75ohm Round Leads
75ohm coaxial cable
Antenna cable
L
R
AC 100-240V~
COAX
50/60Hz
OUT
IN
OUT
CVBS/Y
Pb
Pr
IN
Advertisement
