Advertisement
480i, 480p, 720p, 1080i, 1080p
480i, 480p, 720p, 1080i, 1080p
How to turn the TV on or off
1. Insert the power cord plug into a polarized AC outlet.
2. Press
button on remote control or STAND BY button on the LED TV.
3. Normal picture will be displayed on the screen after 6 seconds. If no signal input,
"No Signal" will be displayed on the screen.
4. If temporary POWER off is required, press
STANDBY button on the LED TV.
5. If you want to completely switch off the power for this unit, unplug the power cord
from the electrical outlet.
6. After switching off the unit, do not turn on the TV again for at least 5 seconds.
Status indication lamp
No light: In power on mode.
Red: In standby mode.
Auto power off
If there is no signal input in TV mode, the TV will automatically access the standby state
in approximately 10 minutes.
Memory before turning TV off
The settings of picture and the preset channels will be memorized after turning off the
unit. After restarting, the unit will work according to the mode set before being turned off.
button on remote control or
Input Source
TV
AV
Component
HDMI 1
HDMI 2
HDMI 3
VGA
USB
Advertisement
