Installing In Windows 95/98 - Tascam PCI-822 User Manual

Installing in Windows 95/98

The PCI-822 requires one PCI slot in your computer.
1. Make sure the computer is off (but leave its power cord plugged in),
and then remove its cover.
2. Using a screwdriver, remove the blank metal bracket from an empty PCI
slot in the computer, and verify that the motherboard has no protruding
components that would obstruct the PCI-822 connectors.
3. Insert the PCI-822 board into the empty PCI slot, and secure the
PCI-822 bracket with a mounting screw.
4. Attach the PCI-822 breakout cable to the 15-pin connector, using the
screws on each side of the connector to secure it firmly.
5. Replace the cover, and restart your computer. As it starts up,
Windows detects the presence of the new hardware, and automatically
opens an installation wizard. In Windows 95, it's the "Update Device
Driver" wizard. In Windows 98, it's the "Add New Hardware" wizard.
6. Follow the instructions in the wizard, letting Windows search for the best
driver for your device. You'll need to insert the PCI-822 CD-ROM into
your CD-ROM drive and click the "Next" button as the wizard leads you
through the driver installation process.
Note (for Windows 98 only): To avoid an installation bug in Windows 98,
choose the top option (Search for the best driver for your device) when
the 'Add New Hardware Wizard' asks 'What do you want Windows to
do?'. Then click the 'Next' button and select 'CD-ROM drive' from the list
of locations to search.
7. When the wizard indicates that the PCI-822 Audio Device is installed,
click the "Finish" button.
8. After the installation is finished, remove the CD-ROM and keep it in a
safe place in case you ever need to re-install the PCI-822.
6 PCI-822 User's Guide