Tm-D1000 Digital Mixer - Tascam PCI-822 User Manual

TM-D1000 Digital Mixer

The PCI-822 can be used with a variety of digital mixers, and it's an
especially good match for the TASCAM TM-D1000.
Typically, you'd use a TDIF cable, 2 SPDIF cables, and 2 MIDI cables to
connect a PCI-822 and a TM-D1000, so you can transmit up to ten
digital audio input and output channels between the computer and
mixer, and also record and play mixer automation data via MIDI.
Either the TM-D1000 or the PCI-822 can be the clock master. Since
the TM-D1000 reverts to internal clocking whenever its digital inputs
are absent (for example, before your computer boots up), it's usually
most convenient to make the TM-D1000 the audio clock master:
1. On the TM-D1000, hold SHIFT and press OPTION.
2. Rotate the DATA ENTRY knob until "System" is displayed under the
"Option" menu, and then press ENTER.
3. When "Master Clock Select" is displayed, press ENTER again.
4. Rotate the DATA ENTRY knob to select the desired clock source, and
then press ENTER. The options are:
Internal[48k] – 48kHz internal
Internal[44.1k] – 44.1kHz internal
TDIF-1 A – the TDIF input
Digital In A – the SPDIF input
5. Press ESCAPE/RECALL three times to return to normal operation.
computer with
PCI-822
Clock Source: TDIF or SPDIF
22 PCI-822 User's Guide
MIDI
MIDI
TM-D1000
TDIF
SPDIF
SPDIF
Clock Source: Internal
sync