Updating The Pci-822 Software; Uninstalling The Pci-822 - Tascam PCI-822 User Manual

Updating the PCI-822 Software

on the Macintosh
You can download the latest version of the PCI-822 software from the
TASCAM web site. To install the latest version of the software:
1. Go to the web site (http://www.tascam.com) and download the latest
software, which is contained in a compressed (hqx) file.
2. If your browser didn't automatically expand the file, use a BinHex
expander (such as Stuffit Expander) to expand the hqx file. If
necessary, you can download a copy of Stuffit Expander from the
Aladdin website (http://www.aladdinsys.com).
3. Double-click on the "PCI-822 Mac Installer" icon, and follow its
instructions.
Uninstalling from the Macintosh
To uninstall the PCI-822, you need to remove the driver and
control panel software, and remove the PCI-822 hardware.
1. To remove the software, delete the following files:
Desktop g PCI-822 Driver Files folder
System Folder g Control Panels g PCI-822
System Folder g Extensions g PCI-822SharedLibrary.dll
System Folder g OMS Folder g PCI-822 OMS Driver
System Folder g Preferences g PCI-822 Settings
Application ASIO Folder g ASIO PCI-822 16-bit
Application ASIO Folder g ASIO PCI-822 24-bit
2. Make sure the computer is off (but leave its power cord plugged in),
and then remove its cover or open the side panel.
3. Remove the mounting screw that holds the PCI-822 bracket in the
computer.
4. Lift the PCI-822 board straight out of its PCI slot, and put the board
into an antistatic bag.
5. Replace the blank metal bracket and the computer's cover or side
panel, and restart your computer.
PCI-822 User's Guide 11