Hoshizaki IM-500SAA Service Training

Hoshizaki IM-500SAA Service Training

Hide thumbs Also See for IM-500SAA:

Advertisement

AM SERVICE TRAINING
Featuring the
IM-500SAA
80047
9/10/13

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IM-500SAA and is the answer not in the manual?

Questions and answers

Summary of Contents for Hoshizaki IM-500SAA

  • Page 1 AM SERVICE TRAINING Featuring the IM-500SAA 80047 9/10/13...
  • Page 2 1) Dilute approximately 7.2 fl. oz. (214 ml) of recommended cleaner Hoshizaki “Scale Away” with 0.8 gal. (3.0 lit.) of water. 2) Turn off the power supply. 3) Remove all ice from the storage bin. 4) Remove the front panel.
  • Page 3 14) Turn on the power supply to start the washing process. 15) Turn off the power supply after 30 minutes. 16) Open the icemaker water supply line shut-off valve. See Fig. 4. 17) Remove the front panel. 18) Move the control switch to the "ICE" position.
  • Page 4 Remove the front panel and top panel. Move the control switch to the “WASH“ position. Slowly pour the sanitizing solution over the top of the evaporator and into the water tank. Do not splash or spill the solution onto other parts. Replace the front panel and top panel in their correct positions.
  • Page 5 Replace the front panel. Clean the storage bin liner using a neutral cleaner. Rinse thoroughly after cleaning. Turn on the power supply to start the automatic ice making process.

Table of Contents