Static Network Parameters; Dns Configuration - HP PL Class 450/500/550/600/650/700/750 Supplementary Manual

System Setup
Configuring Your Linux Personal Workstation

Static Network Parameters

You need to enter the Static Network Parameters. Your system
administrator can tell you your Personal Workstation's IP Address and
Hostname and your network's Gateway and Netmask addresses. The
system administrator can also suggest an appropriate Domain Name.
After typing this information in the appropriate spaces, click on the
button called Additional Network Services. A smaller window, shown
below, appears within the Linux Setup Tool window.
DNS Configuration
If the window does not look like this, click the DNS Configuration tab at
the top of the window. The window contains two smaller windows, called
DNS Servers (IP Address) and DNS Search Domains. Below the left
window, in the "Server:" box, type the network Domain Name Server
address. Click the Add button above the small window to place this
address in the window. If there is more than one domain name server,
you may keep adding addresses until you have added them all. The first
one will be your primary DNS. Below the right window, in the "Domain:"
box, type the domain name and click the Add button above that window.
If there is more than one, enter them all.
4 Chapter 1