Clas Ohlson E27 Quick Start Manual

E27 Lamp Holder with Switch
Art.no 32-1866, 32-4299
Please read the entire instruction manual before using the product and then save it for
future reference. We reserve the right for any errors in text or images and any necessary
changes made to technical data. If you experience any technical problems or have
questions, please contact our customer service team.
Warning: Risk of electric shock. Make sure that the power cord is disconnected
from the power supply before working on the lamp holder.
Wiring the lamp holder
The power cord needs to be wired to the switch and the socket. The power cord should
be protected by using the cable clamp and strain relief. Clas Ohlson has a range of
lighting accessories in case additional light fitting components are required.
If you need to disassemble the lamp holder after
the power cable has been wired, you might need
to bend the little metal locking barb. See the figure.
This can be done using a suitable tool such as a
small screwdriver.
Responsible disposal
This symbol indicates that the product should not be disposed of with general
household waste. This applies throughout the entire EU. In order to prevent
any harm to the environment or health hazards caused by incorrect waste
disposal, the product must be handed in for recycling so that the material can
be disposed of in a responsible manner. When recycling the product, take
it to your local collection facility or contact the place of purchase. They will
ensure that the product is disposed of in an environmentally sound manner.
United Kingdom • www.clasohlson.co.uk
English