Table of Contents
Advertisement
Your Idea
Customize the embedded system based on
5.3 Install Serial Terminal Tool
The serial terminal SecureCRT is used for debugging. It can be used directly after decompression.
Open SecureCRT.exe after copy to PC (path: tools\windows\SecureCRT.exe), then click the icon
Quick Connect to config
Set the parameters as follow:
Protocol: Serial
Port: To be specified by user PC
Baud rate: 1500000
Please check XON/XOFF not selected
Check Save session is selected
13
Advertisement
Table of Contents
Need help?
Do you have a question about the EM3568 and is the answer not in the manual?