Table of Contents
Advertisement
Your Idea
Customize the embedded system based on
4 Install Serial Terminal Tool
The serial terminal SecureCRT is used for debugging. It can be used directly after decompression.
Open SecureCRT.exe after copy to PC (path: tools\windows\SecureCRT.exe), then click the icon
Quick Connect to config.
Set the parameters as follow:
Protocol: Serial
Port: To be specified by user PC
Baud rate: 921600
Please check XON/XOFF but not RTS/CTS
Check Save session
16
Advertisement
Table of Contents
Need help?
Do you have a question about the EM6737 and is the answer not in the manual?