Specifications; Specifications Of This System - Olympus FV5-LD405 User Manual

2 Specifications

2-1 Specifications of this system

Semiconductor laser head
FV5-LD405
FV5-LD440
Semiconductor laser
power supply unit
FV5-LDPSU
FV5-LDPSU(Type2)
Fiber cable
FV5-FUR405
Environment conditions
Storage environment
This device complies with the requirements of both directive 89/336/EEC concerning electromagnetic
compatibility and directive 73/23/EEC concerning low voltage. The CE marking indicates compliance with the
above directives.
Unit
Output Max: 25mW
Wavelength Min: 400nm Max: 408nm Typ: 405nm
Dimensions(mm) 70(W)×127(D)×70(H) (With a manipulator cover)
70(W)×70(D)×70(H) (Without a manipulator cover)
Mass 500g
Output Max: 5mW
Wavelength Min: 437nm Max: 443nm Typ: 440nm
Dimensions(mm) 70(W)×70(D)×70(H)
Mass 500g
Rating 100-120/200-240V~
0.4/0.25A 50/60Hz
Dimensions(mm) 210(W)×300(D)×100(H)
Mass 2,700g
Kind Polarized preserved fiber cable
Fiber output Min: 6mW Max: 13mW (when integrated with FV5-LD405)
Length 3m
Specifications
• Indoor use
• Altitude up to 2000m
• Temperature 10°C~35°C(FV300 and FV500)
18°C~28°C(FV1000)
• Humidity 30%~80% (up to 31°C)
Humidity at environment of 31°C or more will go down
linearly and become 70% at 34°C.
• Power voltage fluctuation: ±10%
• Pollution degree 2 (IEC60664)
• Installation category (Over voltage category) II
(IEC60664)
• Temperature -25°C~65°C
• Humidity 10%~90%
Specifications
II. SYSTEM OUTLINE & SPEC.
II.
2 - 1
Page