ICA cook & eat KP150 F Manual page 8

GENERAL dEScRIPTIoN:
BEFoRE FIRST USE
• All parts of the blender are to be thoroughly
cleaned before being used for the first time.
(see Section: Cleaning).
• Take out the required length of cable from
the cable tidy on the base of the blender and
connect the device to the mains supply.
ASSEMBLING ThE GLASS jAR:
1. Put the rubber sealing ring (4) on the inner
edge of the blade unit (5).
2. Put the blade unit with sealing ring into the
cup base (6).
3. Insert the assembled Cup Base onto the
bottom of the glass jar and secure tightly.
4. Mount the glass cup (3) onto the cup base
unit and tune the cup base unit, and turn
clockwise until glass jar locks into place.
5. Mount the Measure Cup (1) onto the Lid (2).
6. Secure the Lid onto Glass Jar and press
down.
INSERTING ThE GLASS jAR:
1. Make sure that the blender is switched off
(Switch in the '0' setting).
2. Place the jar assembly (7) on to the motor
base (8) and turn clockwise until the glass jar
ass'y locks into the motor base securely
engaged.
how To USE
1. Place the foodstuff you wish to process into
the glass jar.
2. Put the lid on the glass jar and close
securely. Place the measuring cap into the
hole in the lid and turn clockwise to lock.
Model: KP150 F Effekt: 230 V/50 Hz GS 250W
2 Speeds with "p"-setting 800 ml glass jar
3. Switch on the motor base:
Speed setting Use
1 (Low
2 (High)
0
P (Pulse setting) short, powerful impulse
movements
(The switch does not permanently engage in
the" P " setting. You have to hold the switch in
the "P" setting repeatedly.)
4. NB: Operate the motor for a maximum
of 2 minute or alternating 2 minute on,
then 2 minute off to prevent overheating
or consequent damage.
USEFUL TIPS:
• To achieve the best results when pureeing
solid ingredients, place small portions into the
glass jar one by one instead of placing a large
quantity all at once.
• If you are processing solid ingredients, cut
them into small pieces (2-3cm) first.
• When mixing solid ingredients start off first
with a small amount of liquid. Gradually add
more and more liquid through the opening in
the lid.
• Always place your hand on top of the blender
when you are operating the device.
• Be careful when processing hot liquids.
• For stirring solid or very thick liquid
ingredients we recommend that you use the
blender in impulse mode to prevent the blades
from becoming stuck.
TEchNIcAL dATA:
for light usage with liquids
for more solid consistency
– for mixing liquids and solid
foodstuffs
Stop operation
8